SCX-12400

• This powerful 12 “coaxial speaker is the perfect point source if you care about an excellent loudspeaker design.
• It produces a consistent 60° x 40° dispersion pattern with a smooth tonal response.
• As a perfect point source it allows you to build speaker cabinets without unwanted phase problems.
• Lightweight design thanks to the neodymium magnet structure.

• Power handling capacity W(AES):  400
• Max power Watts:  800
• Nominal impedance LF/HF Ω:  8/16
• Frequency range Hz:  65-20K
• LF  :
  • Sensitivity (1W/1m) dB:  98.5
  • Voice coil diameter mm/in:  75.5/3
  • Fs Hz:  70
  • Re Ω:  6
  • Qms :  5.12
  • Qes :  0.38
  • Qts :  0.36
  • Vas L:  35
  • Mms gr:  55
  • Cms mm/N:  0.09
  • BL Tm:  19.8
  • Xmax mm:  5.0
• HF  :
  • Throat diameter mm/in.:  25/1
  • Power handling capacity W(AES):  45
  • Nominal impedance Ω:  16
  • Sensitivity (2.83V/1m) dB:  102
  • Frequency range Hz:  1.5K-20K
  • Voice coil diameter mm/in:  44.4/1.75
  • Re Ω:  12
• Notes :
  • AES power is measured with 6dB crest factor continuous pink noise in 2 hours duration.
  • Max power is defined as 3dB higher than the nominal rating.
  • Sensitivity is measured at one meter at 2.83V and 8 ohm nominal impedance.
  • All measurement of the speaker is done after a sufficient high level of 20Hz sine wave test.
  • Xmas is defined at the BL drops by 18% of the original figure.

SCX-12400 PDF leaflet English   Size: (1.13 MB)PDF_LEAFLET_SCX-12400_00850_en.pdf